GE JV966DSS Use and Care Manual - Page 6

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Care and cleaning of the vent hood. Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood. Receptacle Socket Hood Lights NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip. Receptacle CAUTION: Before replacing Bulb your light bulb, disconnect the electrical power to the hood at the main fuse or circuit breaker panel. Glass cover Be sure to let the light cover and bulb cool completely. For your safety, do not touch a hot bulb with bare hands or a damp cloth. To remove: Turn the glass cover counterclockwise until the glass cover clears the socket. Using gloves or a dry cloth, remove the bulb by pulling it straight out. To replace: Use a new 12-volt, 20-watt (maximum) Halogen bulb for a G-4 base. Use gloves or cloth Push the bulb straight into the receptacle all the way. Place the glass cover onto the socket and turn clockwise until secure. For improved lighting, clean the glass cover frequently using a damp cloth. This should be done when the hood is completely cool. Reconnect electrical power to the hood. Using gloves or a dry cloth, remove the new bulb from its packaging. NOTE: Do not touch the new halogen bulb with bare fingers. Touching the bulb with bare fingers will significantly reduce the life of the bulb. 6