GE JVM1540DM Use and Care Manual - Page 35

Charcoal Filter, on some models, To Remove, To Install, cannot be cleaned. It, must be replaced. Order

Page 35 highlights

Charcoal Filter (on some models) The charcoal filter cannot be cleaned. It must be replaced. Order Part No. WB02X10776 from your GE supplier. To Remove Charcoal Filter Remove 4 grille screws to remove the grille. If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors. The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6-12 months, depending on hood usage). See "Optional Kits," page 9 for more information. To remove the charcoal filter, disconnect power at the main fuse or circuit breaker panel or pull the plug. Remove the top grille by removing the 4 screws that hold it in place. Slide the filter toward the front of the oven and remove it. To Install Charcoal Filter To install a new filter, remove plastic and other outer wrapping from the new filter. Insert the filter into the top opening of the oven as shown. When properly installed, the wire mesh of the filter should be visible from the front. Replace the grille and 4 screws. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

35
If the model is not vented
to the outside, the air will
be recirculated through a
disposable charcoal filter
that helps remove smoke
and odors.
The charcoal filter
should be replaced when
it is noticeably dirty or
discolored (usually after
6–12 months, depending
on hood usage). See
“Optional Kits,” page 9
for more information.
The charcoal filter
cannot be cleaned. It
must be replaced. Order
Part No. WB02X10776
from your GE supplier.
Charcoal Filter
(on some models)
To remove the charcoal
filter, disconnect power at
the main fuse or circuit
breaker panel or pull
the plug.
Remove the top grille by
removing the 4 screws that
hold it in place. Slide the
filter toward the front of
the oven and remove it.
To Remove
Charcoal Filter
Remove 4 grille screws to
remove the grille.
To install a new filter,
remove plastic and other
outer wrapping from the
new filter.
Insert the filter into the
top opening of the oven
as shown. When properly
installed, the wire mesh of
the filter should be visible
from the front. Replace
the grille and 4 screws.
To Install
Charcoal Filter