GE JVM7195EKES Installation Instructions - Page 21
Check Blower Motor, Orientation, Adapting Microwave Blower, For Recirculation
View all GE JVM7195EKES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation Instructions C3. CHECK BLOWER MOTOR ORIENTATION 1 The blower fan blade opening should be facing the front of the microwave. If the fan opening is already facing the front of the microwave, skip to Step C5. Otherwise, continue to Step C4 to adjust the blower orientation. C4. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION 1 Remove and save screws that holds blower motor to microwave oven. Blower Motor Retaining Screws Back of Microwave Oven 2 Open the blower door by lifting it up at the back of the microwave oven. 4 Roll the blower unit 90° so that fan blade openings are facing toward the front of the microwave. BEFORE: Fan Blade Openings Facing Up Roll AFTER: Fan Blade Openings Facing Forward 3 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. NOTE: Make sure wires remain routed in the grooves of the motor frame. 5 Place the blower unit back into the opening. CAUTION Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched. 21