GE JX220 Assembly Instructions - Page 2
Assembly To Advantium Built-in Speedcook Oven
View all GE JX220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ASSEMBLY TO ADVANTIUM BUILT-IN SPEEDCOOK OVEN 2 UNDER-THE-COUNTER (UTC) MOUNTING BRACKET INSTALLATION NOTE: For UTC models PSB1200, PSB1201 and ZSC1201 only. A Open the accessory drawer so you have access to the top bracket. B Remove the three screws securing the top bracket. C Install the new UTC mounting bracket using the screws removed previously. ASSEMBLING THE OVEN TO DRAWER (cont.) C Remove the front two bottom screws on each side of the oven and the top center screw on each side of the storage drawer. D Close the drawer and proceed with the installation. 3 ASSEMBLING THE OVEN TO DRAWER A Place storage drawer on a surface with the front of drawer hanging over the edge of the surface. Not placing the front edge of drawer over the edge of the surface may result in damage to the drawer since the front edge of drawer hangs below the bottom of drawer. B Place the oven on top of the storage drawer. Make sure that the back and sides of the oven align with the back and sides of drawer. D Place the side supports into the tabs on the drawer and secure using the screws supplied and the screws removed in Step C. Side Support NOTE: The bottom of the oven side flanges will sit directly in front of the top of the storage drawer side flanges. 120v only E The oven and storage drawer assembly is now ready to be installed. Return to the Advantium 120V or 240V Built-In SpeedCook Oven Installation Instructions to complete the installation. Printed in Korea 2