GE JX2200NBB Assembly Instructions - Page 1

GE Consumer & Industrial Appliances Assembly Instructions Advantium® Built-In Accessory Storage Drawer JX2200, JX2201, ZX2201 BEFORE YOU BEGIN Read these instructions completely and carefully. Read the Installation Instructions for the Advantium 120V or 240V oven completely and carefully for cutout dimensions and step-by-step instructions. IMPORTANT - Save these instructions for local inspector's use. IMPORTANT - Observe all governing codes and ordinances. • NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer. • NOTE TO CONSUMER: Keep these instructions with your Advantium 120V or 240V Oven Owner's Manual for future reference. • SKILL LEVEL: Installation of this appliance requires basic mechanical skills. • COMPLETION TIME: One hour with the installation of an Advantium 120V or 240V oven. • Proper installation is the responsibility of the installer. • Product failure due to improper installation is not covered under the Warranty. See the Advantium 120V or 240V Oven Owner's Manual for warranty information. PRODUCT DIMENSIONS AND CLEARANCES 5" Allow 15" Clearance When Fully Open NOTE: Appearance will vary by model. TOOLS REQUIRED • #2 Phillips screwdriver PARTS SUPPLIED • Side supports (2) • Brass screws (8) • Color-matched screws (5) • Under-the-Counter Mounting Bracket (1) 1 REMOVE PACKAGING AND PARTS • Remove the drawer from the carton. • Remove all packing material and tape. • Open the drawer and remove any parts inside. • Locate parts. MODELS AVAILABLE Profile Models: JX2200BB-Black JX2201SS-Stainless Steel Monogram Models: ZX2201SS-Stainless Steel (for installation above 36″ only) NOTE: Advantium 240V model ZSC2202SS and Advantium 120V model ZSC1202 CANNOT be installed with an accessory storage drawer. See Installation Preparation Without an Accessory Storage Drawer in the Installation Instructions for these models. Side Supports (2) Assembly Instructions Under-the-Counter (UTC) Mounting Bracket Screws (6 required, 2 extra) Color-Matched Screws (4 required, 1 extra) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MFL06213304 49-40594 12-08 JR