GE P2B912 Owners Manual - Page 11

Safety Instructions Using the oven controls. (Throughout this manual, features and appearance may vary from your model.) ge.com Operating Instructions Care and Cleaning Installation Instructions Features, appearance and pad locations may vary. Oven Control, Clock, Timer and Features (on some models) NOTE: For gas-only baking, hold the BAKE pad for 3 seconds. Self Clean Pad Touch to select self-cleaning function. See the Using the self-cleaning oven section. Bake Pad Touch to select the bake function. Broil Hi/Lo Pad Touch to select the broil function. Oven Light On/Off Pad Touch to turn the oven light on or off. Display Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode, the times set for the timer or automatic oven operations, and if the range is locked. If "F- and a number or letter" flash in the display and the oven control signals, this indicates a function error code. Touch the Clear/Off pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service. If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset. The time of day will flash in the display when there has been a power outage. Cooking Time Pad Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out. Clock Pad Touch before setting the clock. Kitchen Timer On/Off Pad Touch to select the timer feature. Delay Start Pad Use along with Cooking Time or Self Clean pads to set the oven to start and stop automatically at a time you set. Control Lockout Pad Touch and hold the Control Lockout pad for 3 seconds to lock/unlock the control panel so it cannot be activated. Clear/Off Pad Touch to cancel ALL oven operations except the clock, timer and Control Lockout. Start Pad Must be touched to start any cooking or cleaning function. Number Pads Use to set any function requiring numbers, such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning. Warming Drawer Set/Off Pad Touch this pad and then touch number pads 1-3 to use the warming drawer. See the Using the electric warming drawer section. 11 Troubleshooting Tips Consumer Support