GE P2B918DEMWW Installation Instructions - Page 52
Anti-Tip Device, LP, When All Hookups Are Completed, Converting to LP Gas
![]() |
UPC - 084691166368
View all GE P2B918DEMWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Operating Instructions Safety Instructions Installation of the range. Install the Anti-Tip Device An Anti-Tip bracket is supplied with instructions for installation in a variety of locations. The instructions include all necessary information to complete the installation. Read the Safety Instructions and the instructions that fit your situation before beginning installation. Bracket Screw must enter wood or metal Wall plate Typical installation of anti-tip bracket attachment to wall. WARNING: s Range must be secured by Anti-Tip bracket supplied. s If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB2X7909. s See instructions to install (supplied with bracket). s Unless properly installed, the range could be tipped by stepping or sitting on the door. Injury might result from spilled hot liquids or from the range itself. When All Hookups Are Completed: MAKE SURE ALL CONTROLS ARE LEFT IN THE OFF POSITION. MAKE SURE THE FLOW OF COMBUSTION AND VENTILATION AIR TO THE RANGE IS UNOBSTRUCTED. Converting to LP Gas (or converting back to natural gas from LP) This range leaves the factory set for use with natural The conversion instructions and LP orifices can be gas. If you want to convert to LP gas, the conversion found attached to the range next to the pressure must be performed by a qualified LP gas installer. regulator. Keep these instructions and the orifices in case you want to convert back to natural gas. Installation Instructions Consumer Support Troubleshooting Tips 52
![](/manual_guide/products/general-electric-p2b918semss-installation-instructions-cd12988/52.png)