GE P2S930SELSS LP Conversion Kit - Page 2
Additional Information, Adjusting Low Flame Setting, On Cooktop Burners - range
View all GE P2S930SELSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ADJUSTING LOW FLAME SETTING ON COOKTOP BURNERS Low setting adjustments must be made with other burners in operation on a medium setting. This procedure prevents the ORZÀDPHIURPEHLQJVHWWRRORZUHVXOWLQJLQWKHÀDPHEHLQJ extinguished when other burners are turned on. A. Turn on all surface burners to medium setting. % 7XUQWKHNQRERQWKHEXUQHUEHLQJDGMXVWHGWR³/2´ & 5HPRYHWKHNQREDQGLQVHUWDVPDOOÀDWEODGHVFUHZGULYHU into the valve shaft and/or side adjustment screw(s) as shown and turn clockwise to fully tighten down the bypass screw(s). Repeat for all valves. ' ,IÀDPHDSSHDUVWRRORZRUXQVWDEOHVORZO\WXUQE\SDVVVFUHZ FRXQWHUFORFNZLVHXQWLODVWDEOHÀDPHH[LVWVIRUHDFKEXUQHU Remember, other burners must be turned on to medium. SPECIALTY BURNERS Dual Oval Burner - This burner should be properly adjusted with both bypass screws completely screwed in. Multi-Ring Burner±7KHRXWHUULQJRIÀDPHVVKRXOGEH DGMXVWHGZLWKWKHNQREDWWKH0(' Burner Cap by adjusting the set screw in the Flames FHQWHUYDOYHVKDIW7KHÀDPHVVKRXOG be adjusted so that they barely curl over the top edge of the burner cap. 7KHFHQWHUULQJRIÀDPHVVKRXOGEH adjusted with the knob at the LO setting by adjusting the set screw to the right of the valve shaft. ( $ GGLWLRQDOO\IRUHDFKEXUQHUEHLQJDGMXVWHGTXLFNO\RSHQ DQGFORVHWKHRYHQGRRUZKLOHREVHUYLQJÀDPH,IÀDPHLV extinguished, continue adjusting bypass screw for a larger ÀDPH5HSHDWGRRURSHQLQJVXQWLOÀDPHLVVWDEOH F. Replace the knob. Adjustment screw for outer ring Adjustment screw for center ring Adjustment screw for center ring Adjustment screw for 2 oval rings NOTICE: 2QFHWKHFRQYHUVLRQLVFRPSOHWHDQGFRQ¿UPHG¿OORXW the propane sticker and include your name, organization and date conversion was made. Apply the sticker to the range near the regulator to alert others in the future that this appliance has been converted to propane. If converting back to natural gas from propane, please remove the sticker so others know the appliance is set to use natural gas. ADDITIONAL INFORMATION BURNER OUTPUT RATINGS: BTU/HR NG (Natural) Gas 5" W.C.P. BURNER LF BTU RATE 21,000 ORIFICE SIZE (mm) COLOR MARKING LF1 N/A 0.045 None 114N LF2 N/A 0.045 None 114N LF3 N/A 0.045 None 114N LFC N/A 0.025 None 63N LR 5,000 0.040 :KLWH3XUSOH 101N RF 15,000 0.070 Brown 178N RR 9,500 0.0555 Yellow 141N C 8,000 C1 9,500 0.0555 Yellow 141N C2 6,800 0.047 None 119N 198 N III Denotes 1.98mm Orifice size opening Denotes Natural Gas Adjustment screws for multi-ring burner only Adjustment screws for dual oval burner only Center adjustment screw only for all other burners. SPECIAL NOTE: To convert the oven back to natural gas, reverse the instructions given in making propane adjustments. PROPANE CONVERSION INSTRUCTIONS 31-11082 05-17 GEA P2S930