GE PD900DPWW Installation Instructions - Page 5
Standard Installation Preparation
UPC - 084691199212
View all GE PD900DPWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Instructions B Standard Installation Preparation Standard Installation Wall 9/16" Min. Flat 1/4" Min. Flat 23-3/16" 25" Typically 9/16" Min. Flat 29-15/16"- 30-1/16" Smooth Cut Flat Area R 1/4" Range Support Countertop The Standard Installation of this Drop-In Range is to hang by the countertop on the side metal flanges under glass cooktop. This Range must not be installed on a base or sub structure (2"x 4" support). If the construction of your cabinet cannot provide a 1/4" flat area at the back of the countertop opening, consider changing the countertop to accommodate this dimension. If the area is not flat, excess tension may be applied to the glass cooktop, causing breakage and voiding the warranty. Braces secured between the underside of the countertop and the cabinet if required to obtain 1-1/4" minimum thickness (two sides) B1 Center the 30" wide opening over the adjacent cabinets and mark with a straight edge. B2 Using a straight edge, mark the back line at 23-3/16" from the front edge of the counter. B3 Be careful not to damage the adjacent cabinets while cutting the countertop. B4 Remove countertop raised edge, if incorporated. (See illustration on page 4) 5