GE PDW1800NII Installation Instructions - Page 2
Installation Preparation
UPC - 084691174202
View all GE PDW1800NII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation Preparation PARTS SUPPLIED WITH INSTALLATION KIT: ■ Two #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or sides of cabinets. ■ Junction box cover and #10-1/2" hex-head screw ■ Side and top trim ■ Trim Panel Accessory Kit (not shown) (Custom panel models only) ■ Sound upgrade kit (some models) ■ Drain hose (78") , drain hose hanger and hose clamp ■ Literature, product samples and/or coupons ■ Hard water test strip (Models with Bulk Dispenser) Screw Kit #8 Phillips #10 Hex-Head Special Head Screws J-Box Screw 5/8" long 1/2" long Trim Pieces Drain Hose Hanger Sound Upgrade Kit (Some Models) Hard Water Test Strip (Models with Bulk Dispenser) Drain Hose (78") Side Trim Side Trim Top Trim Junction Box Cover Hose Clamp MATERIALS YOU WILL NEED: ■ Ferrule, compression nut and 90° Elbow (3/8" NPT external thread on one end, opposite end sized to fit water supply) ■ Thread seal tape ■ UL-listed wire nuts (3) 90° Elbow, Ferrule and Compression Nut Hand Shut-Off Valve Thread Seal Tape Wire Nuts (3) Materials For New Installations Only: ■ Air gap for drain hose, if required ■ Waste tee for house plumbing, if applicable ■ Electrical cable or power cord, if applicable ■ Screw-type hose clamps ■ Strain relief for electrical connection ■ Hand shut-off valve ■ Water line 3/8" min. copper ■ Coupler for extending drain line, if applicable ■ GPF10L 10' drain hose, if needed Hot Water Line Electrical Cable Waste Tee (or Power Cord, if applicable) GPF10L 10' Drain Hose Air Screw-Type Gap Hose Clamps Strain Relief Coupler TOOLS YOU WILL NEED: ■ Phillips-head screwdriver ■ 1/4" and 5/16" nutdriver ■ 6" Adjustable wrench ■ Level ■ Carpenter's square ■ Measuring tape ■ Safety glasses ■ Flashlight ■ Bucket to catch water when flushing the line ■ 15/16" socket ■ Gloves For New Installations Only: ■ Tubing cutter ■ Drill and appropriate bits ■ Hole saw set 2 PhillipsHead Screwdriver 1/4" and 5/16" Nutdriver Level 1/4" and 15/16" Socket Flashlight 6" Adjustable Wrench Tubing Cutter Carpenter's Square Safety Glasses Measuring Tape Gloves Bucket Hole Saw Set Drill and Bits