GE PDW7880PSS Owners Manual - Page 5

Enhancements/Extras - model

Page 5 highlights

ge.com SPEED CYCLE (on some models CHINA CRYSTAL GLASSES (on some models RINSE ONLY 7.5 gal., 35 min. This cycle is for everyday dishes and glassware. 7.5 gal., 35 min. This cgcle is for lightly soiled china and crgstal. 7.5 gal., 35 min. This cgcle is specifically designed for glasses. 2.5 gal., 10 min. For rinsing partial loads that will be washed later Do not use detergent with this cgcle. NOTE; The CHINA CRYSTAL/PLASTICS (some models) selector is a toggle pad, toggle the pod until the desired cycle is indicated. NOTE; This dishwasher is equipped with a CleanSensor TMwith automatic temperature control, therefore, cycle length and time may vary depending on soil and temperature conditions. NOTE; Only the Anti-Bacteria cycle has been designed to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy. _]l Enhancements/Extras The light above the selected pad will be ON to indicate which ENHANCEMENT/ERTRA has been selected. PRE WASH (on some models) For use with heavily soiled and/or dried-on, baked-on soils. This option MUST be selected PRIOR to starting the cgcle. This option adds 16 minutes to the cycle time. NOTE: Cannot be selected with RINSE ONLY cgcle. HEATED DRY Light OFF Shuts off the drying heat option. Dishes air dry naturally and energg is saved. For faster air dry, you can prop the door open after the CLEAN light illuminates. HEATED DRY Light ON LOCK Turns the heater on for fast drying. This will extend the time to your wash cgcle bg 8 minutes for the SPEED CYCLE and 30 minutes for all other cgcles. NOTE: Cannot be selected with RINSE ONLY cgcle. You can lock the controls to prevent any selections from being mode. Or you con lock the controls offer you hove started o cycle. Children cannot occidentally start dishwasher by touching pods with this option selected. To unlock the dishwasher controls, touch and hold the HEATED DRY pad for 3 seconds. The light above the LOCK pad will turn off. To lock the dishwasher, touch and hold the HEATED DRY pad for 3 seconds. The light above the LOCK pad will turn on. ADDED HEAT or EXTRAHOT WASH (on some models) When selected, the cgcle will run longer with heating elements on to improve both wash and dry performance. NOTE: Cannot be selected with RINSE ONLY cgcle. DELAY HOURS RESET You can delag the start of a wash cgcle for up to 9 hours. Touch the DELAY HOURSpad to choose the number of hours you want to delag the start of the cgcle; then touch START/RESET.The machine will count down and start automatically at the correct time. Touching START/RESETa second time will cancel the DELAY START selection. NOTE: If you forget to fully close the door, a reminder signal will beep until you do so. To change a cgcle after washing starts, touch the START/RESETpad to cancel the cycle. The START/RESETlight will flash while the water is pumped out if needed. This takes approximately 90 seconds. When the light stops flashing, the dishwasher can be reprogrammed and restarted.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

ge.com
SPEED CYCLE
(on some models
CHINA CRYSTAL
GLASSES
(on some models
RINSE ONLY
7.5 gal., 35 min.
This cycle is for everyday dishes and glassware.
7.5 gal., 35 min.
This cgcle is for lightly soiled china and crgstal.
7.5 gal., 35 min.
This cgcle is specifically designed for glasses.
2.5 gal., 10 min.
For rinsing partial loads that will be washed later Do not use detergent with this cgcle.
NOTE; The CHINA CRYSTAL/PLASTICS (some models)
selector
is
a
toggle pad, toggle the pod until the
desired cycle is indicated.
NOTE; This dishwasher
is equipped
with
a CleanSensor TM
with
automatic
temperature
control, therefore, cycle
length
and
time
may
vary depending
on
soil and
temperature
conditions.
NOTE; Only the Anti-Bacteria
cycle has been designed to meet the requirements
of Section 6, NSF 184 for
soil
removal
and sanitization
efficacy.
_]l
Enhancements/Extras
The
light
above
the
selected
pad
will be ON
to indicate
which
ENHANCEMENT/ERTRA
has
been
selected.
PRE WASH
For use
with
heavily
soiled
and/or
dried-on,
baked-on
soils.
This
option
MUST be
(on some
models)
selected
PRIOR
to starting
the
cgcle.
This
option
adds
16
minutes
to the
cycle
time.
NOTE:
Cannot
be
selected
with
RINSE
ONLY
cgcle.
HEATED DRY
Shuts off the
drying
heat option.
Dishes air dry
naturally
and energg
is saved.
For
Light OFF
faster
air dry, you
can prop
the door
open
after
the CLEAN light
illuminates.
HEATED DRY
Turns the
heater
on for fast
drying.
This will extend
the
time
to your wash
cgcle
bg 8
Light ON
minutes
for the
SPEED
CYCLE and
30
minutes
for all other
cgcles.
NOTE:
Cannot
be
selected
with
RINSE ONLY
cgcle.
LOCK
You
can
lock
the
controls
to prevent
any
selections
from
being
mode.
Or
you
con
lock
the
controls
offer
you
hove
started
o
cycle.
Children
cannot
occidentally
start
dishwasher
by
touching
pods
with
this
option
selected.
To unlock
the
dishwasher
controls,
touch
and
hold
the
HEATED
DRY
pad
for 3 seconds.
The light
above
the
LOCK
pad
will turn
off. To lock
the
dishwasher,
touch
and
hold
the
HEATED
DRY
pad
for
3
seconds.
The
light
above
the
LOCK
pad
will turn
on.
ADDED
HEAT or
When
selected,
the
cgcle will
run longer
with
heating
elements
on to improve
both
EXTRAHOTWASH
wash
and dry
performance.
NOTE:
Cannot
be selected
with
RINSE ONLY
cgcle.
(on some models)
DELAY
HOURS
You can delag
the start
of a wash
cgcle for up to 9 hours. Touch the
DELAY
HOURS
pad
to choose
the number
of hours
you want to delag the start
of the cgcle; then
touch
START/RESET.The machine
will count down
and start automatically
at the correct
time.
Touching
START/RESETa second
time
will cancel
the
DELAY START
selection.
NOTE:
If
you forget to fully close the door, a reminder
signal will beep until you do so.
RESET
To change a cgcle after washing starts, touch the
START/RESET
pad to cancel the
cycle. The START/RESET
light will flash while the water is pumped out if needed. This
takes approximately
90 seconds. When the light stops flashing, the dishwasher
can be reprogrammed
and restarted.