GE PDWT500PWW Owners Manual - Page 6
About the dishwasher, panel.
UPC - 084691186816
View all GE PDWT500PWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
About the dishwasher control panel. D Enhancements The light above the selected pad will be ON to indicate which ENHANCEMENThas been selected. DELAY HOURS You can delay the start of a wash cycle for up to 2/4hours (depending on model). Pressthe DELAYSTARTpad to choose the number of hours you want to delay the start of the cycle; then press START/RESET. Front-Control Dishwashers: The machine will count down and start automatically at the correct time. Top-Control Dishwashers:After closing the door,the machine will count down and automatically start at the correct time. NOTE:To cancel the DELAYSTARTselection before the cycle begins, repeatedly press the DELAYSTARTpad until the display is blank. TEMP BOOST/ When selected, the cycle will run longer with heating element on to improve both wash ADDED HEAT/ and dry performance. EXTRA HOT WASH NOTE:Cannot be selected with RINSEANDHOLD cycle. STEAM PRE-WASH/ For use with heavily soiled and/or dried-on, baked-on soils.This option MUSTbe PRE-WASH selected PRIORto starting the cycle. The PRE-WASHoption adds 15 minutes (on some models) and the STEAMPRE-WASHoption adds 2/4minutes to the cycle time. NOTE:Cannot be selected with RINSEANDHOLD cycle. HEATEDDRY Shuts offthe drying heat option. Disheswill air dry naturally (Front-Control Light Off Dishwashers)or fan dry (Top-Control Dishwashers)to save energy. HEATEDDRY Turns the heater on for fast drying. This will extend the total cycle time by/45 minutes Light On for the NORMALcycle, 58 minutes for the TOPRACKONLYand COOKWAREcycles, ]2 minutes for the DEEPCLEANcycle, 15 minutes for the ANTI-BACTERIAand PLASTICScycles, and 30 minutes for all other cycles. LOCK You can lock the controls to prevent any selections from being made. Or you can lock the controls after you hove started a cycle. Children cannot accidentally start dishwasher by touching pads with this option selected. El Start To unlock the dishwasher controls, press and hold the HEATEDDRY pad for 3 seconds. The light above the lock pad will turn off. To lock the dishwasher, press and hold the HEATEDDRY pad for 3 seconds.The light above the LOCKpad will turn on. RESET To change a cycle after washing starts... Front-Control Dishwashers: Touch the START/RESEpTad to cancel the cycle. TheSTART/RESETlighwt ill flash while the water is pumped out if needed.This takes approximately 2 minutes. Top-Control Dishwashers: Open the door slowly to prevent splash-out. Touch the START/RESEpTad to cancel the cycle. If the START/RESElTight is flashing, close the door until the water pumps out (this takes approximately 2 minutes) and the light stops flashing. When the light stops flashing, the dishwasher can be reprogrammed and restarted. Front-Control Dishwashers Close and latch the dishwasher door and select the cycle and desired enhancements. Touch the START/RESEpTad to begin the cycle. Water fill begins immediately, and approximately 60 seconds later the wash action begins. When the dishwasher door is fully closed and latched, the control panel lights will display the lost settings you selected. If you don't wont to change any of the settings, simply touch the START/RESEpTad to begin the cycle. If the door is closed,the indicator lights will turn off if the START/RESEpTad is not selectedwithin 5 minutes. To activate the display, open and close the door or press any pad.