GE PFSF2MJX Owners Manual - Page 14
Replacing the Light Bulbs, Operating Instructions
View all GE PFSF2MJX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operating Instructions Safety Instructions Replacing the light bulbs. Turning the control to the 0 (off) position does not remove power to the light circuit. Refrigerator Lights CAUTION: Light bulbs may be hot. Unplug the refrigerator. To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back. Rotate the shield down and then forward to release the tabs at the front of the shield. After replacing with an appliance bulb of the same or lower wattage, replace the shield. Plug the refrigerator back in. NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002. Appearance may vary Freezer Light CAUTION: Light bulbs may be hot. Unplug the refrigerator. The bulb is located at the top of the freezer inside a light shield. To remove the shield, grasp the shield at the back and pull out to release the tabs at the back. Rotate the shield down and then forward to release the tabs at the front of the shield. After replacing with an appliance bulb of the same or lower wattage, replace the shield. Plug the refrigerator back in. Lights are behind crisper drawers Middle Lights CAUTION: Light bulbs may be hot. Unplug the refrigerator. The bulbs are located behind the crisper drawers. To remove the drawers, lift up slightly while pulling the drawer past the stop location. Replace the bulbs with appliance bulbs of the same or lower wattage. Replace crisper drawers by sliding them gently back onto the tracks while lifting up slightly. Plug the refrigerator back in. Light Bulbs Installation Instructions Consumer Support Troubleshooting Tips 14