GE PFSF2MJY Owners Manual - Page 27
Installation Instructions, REMOVING THE DOORS, Double Door Refrigerator Models only, IMPORTANT NOTES
View all GE PFSF2MJY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Instructions REMOVING THE DOORS (Double Door Refrigerator Models only) IMPORTANT NOTES NOTE: Door swing is not reversible. • Read the instructions all the way through before starting. • Handle parts carefully to avoid scratching paint. • Set screws down by their related parts to avoid using them in the wrong places. • Provide a non-scratching work surface for the doors. IMPORTANT: Once you begin, do not move the cabinet. These instructions are for removing the doors. Unplug the refrigerator from its electrical outlet. Empty all door shelves, including the dairy compartment . 1 REMOVE THE REFRIGERATOR DOORS A Tape the doors shut with masking tape. (for water dispenser models) B Start with left-hand door first: Remove the screw securing the center hinge cover, lift the hinge cover and place to the side on top of the refrigerator. TOOLS YOU WILL NEED Adjustable Wrench 3/8" and 10 mm Socket Ratchet/Driver Masking Tape Thin-blade Screwdriver Remove hinge cover (1 Phillips screw) (for water dispenser models) C Remove water coupling and power coupling. C1 Phillips Screwdriver C2 C3 Pull apart power coupling to disconnect 27 Water Coupling Remove the metal spring clip. Use a screwdriver to push the red plastic locking clip down and off. Pull tube. Water Coupling Push red collar and hold. Power Coupling Black mark flush with collar assembly