GE PFSF2MJYWW Use and Care Manual - Page 22
Installation Instructions, REMOVING THE FREEZER DRAWER, REMOVE THE BASE GRILLE, REMOVE THE BASKET
UPC - 084691188995
View all GE PFSF2MJYWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation Instructions REMOVING THE FREEZER DRAWER The freezer drawer can be removed, if needed, to fit through tight areas. Read these instructions completely and carefully. 1 REMOVE THE BASKET A Open the freezer drawer until it stops. B The freezer basket rests on a frame inside the freezer drawer. Lift the basket up at the back. C Lift the front up and lift the entire basket up and out of the drawer. 2 REMOVE THE DRAWER FRONT FROM THE SLIDES (cont.) B Lift up on both sides of the freezer drawer handle to separate the drawer railings from the rail assemblies. C Set the drawer front on a non-scratching surface. D Push the rail assemblies back into locking position. A 2 REMOVE THE DRAWER FRONT FROM THE SLIDES A Remove the screw on each side of the railing. Rail Assembly Drawer Assembly 3 REMOVE THE BASE GRILLE (if needed) If, after removing the freezer drawer and refrigerator door, the refrigerator will still not fit through a doorway, the base grille can be removed. A Remove the base grille by removing the screws. Screw 22