GE PGP989DNBB Quick Specs - Page 1
GE PGP989DNBB - 30" Gas Downdraft Cooktop Manual
UPC - 084691172536
View all GE PGP989DNBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PGP989DN/TN GE Profile™ 30" Downdraft Gas Cooktop Dimensions and Installation Information Wall Installation: Wall installations require 25" countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through-the-wall ducting. Requires special offset adapter JXRW89. 227⁄16ʺ (229⁄16ʺ SS) 297⁄8ʺ (30ʺ SS) 22ʺ 227⁄16ʺ (229⁄16ʺ SS) 201⁄2ʺ 283⁄4ʺ 22ʺ Cut-out Dimensions (in inches) 201⁄2ʺ 23⁄16ʺ (21⁄4ʺ SS) 297⁄8ʺ (30ʺ SS) 283⁄4ʺ Peninsula or Island Installation: For peninsula/ islands a minimum 26" countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation. Slab Installation: For peninsula or island installation and rear wall ducting, 6" PVC duct or locally approved piping should be used if installing under a poured concrete slab. Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data. 20-5/8 Cut-out Dimensions (in inches) Cabinet Dimensions (in inches) 25 *U.L. Requirement. 28-7/8 16 1-7/8" 20-5/8 MIN. Required* Note: A 5" minimum spacing to adjacent side wall is required 9 CL 4 20 Note: These cooktops are approved for indoor use only. 25 28-7/8 23⁄16ʺ (21⁄4ʺ SS) 10-1/2 For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. *U.L. Requirement. 1-7/8" MIN. Required* *Note: A 5" minimum spacing to adjacent side wall is required Note: A 5" minimum spacing to adjacent sidDeimwenasllioisn raenqduiinrsetdallation information are shown in inches. Listed by Underwriters Laboratories Specification Revised 4/09 230284