GE PGS960BELTS Quick Specs - Page 1

PGS960BEL/EEL/SEL GE Profile™ Series 30" Slide-In Front Control Gas Double Oven Convection Range NOTE: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. NOTE: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating. 1 1/8" INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for ­ current dimensional data. 1 1/8" GAS PIPE AND ELECTRICAL OUTLET LOCATIONS GAS PIPE AND ELECTRICAL For all installations, install the required rear trim to back of 30" range with 4 screws provide+3d/6-. 1/4" 1/4" 36 1/4" +/- 1/4" GAS PIPE AND ELECTRICAL OUTLET LOCA30T"IONS Side Wall min 18" minimum to cabinet above counter 30 30" 16" min max to 1 1/8" 26 7/8" w/o handle 29 1/2" w/handle 26 7/8" w/o handle cabinets above counter 4 1/2" 4" 0" minimum to cabinets below cooktop 36 1/4" +/- 1/4" *43 7/8" 29 1/2" w3/0ha"ndle *43 7/8" 30" 30" min30" 13" 9" 5" SidesleeuGacpnWatrpdsiclyaalll 24" 18" minimum 12to1/c2a"binet above counter 16" 14 1/2" *Dimensions are referenced from the point at the max to 2" cabinets 26 7/8"back w/o handle of the range that will contact the rear wall first. *Dimensions are above referencecodufnrtoemr the poin4t1a/2t"the 29 1/2" w/handle *Dimension are referenced from the point at back of the range that will contact the rear wall first. the back of the range that will contact the rear 4" 0" minimum to cabinets below cooktop 30" 6" right side 6" left side minimum to side wall 16" ccamoabbuai6mt6noxon""eivtnstlreteoeisiirgmdftheustmwisdaiedlle 36" 13" 9" 2" 4 1/2" 4" 5" esleuGacpnatrpdsiclyal14 1/2" 12 *43 7/8" wb*b*eaaHtclwlekfiegigreushnatt.rttdMohekabixatucipdnkpismgetuaeralnlaersnddido.bnlaosswehedoruodldno3obC0reas".fcéosntsyildeere*twbhdDeaeitlmwlbfeeairencsnskt.iootMhnfeatahxureepdrpimraeenerfegnaresneitdnohcnaloetswdwhefoirlruol dclmdooonbt1hrte3ase".cc9pto"otnhisneitdreaeesletuGarcapneatrpdrsicldyal1451"/2" 12 24" 1/2" 36" *Dimensions are referenced from the point at the **Height to backguard based2"on Café style backguard kit installed. 30" back of the range that will contact the rear wall first. *Dimension are referenced from the point at the back of the range that will contact the rear wall first. Max dimension shouldFobreancsownesrisdteoryeodur Monogram, GE Café™ Series, GE Profile™ Series or between the upper and lower dGooErAs.ppliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000. **Height to backguard based on Café style backguard kit installed. ADA COMPLIANT All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Revised 8/17