GE PHB925STSS Quick Specs - Page 1
GE PHB925STSS Manual
View all GE PHB925STSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PHB925ST GE Profile™ 30" Free-Standing Induction Range with Warming Drawer Dimensions and Installation Information (in inches) KW Rating 240V 12.2 208V 9.2 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. Receptacle Locations Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, highheat, no-load heating element operation. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Created 4/11 221027