GE PHP9036SJSS Quick Specs

Specification Created 1/15

For answers to your Monogram,

®

GE Profile

™

or GE

®

appliance questions, visit our website

at geappliances.com or call GE Answer Center

®

service, 800.626.2000.

Listed by

Underwriters

Laboratories

To insure accuracy, it is best to make a

template when cutting the opening in the counter

Electrical junction box 16" MIN.

below countertop

Cooktop

36-1/8"

20-1/2"

18-7/8"

33-3/4"

19-1/8" to

19-1/4"

33-7/8"

to 34"

2-1/2" MIN.

Required

1-3/4" MIN.

to rear wall

4-5/8" at baffle near center

of vunit (except when installed

above an approved wall

oven) and 3-1/4" at rear

of air intake

overhead cabinets (when no

hood or microwave is installed)

30" MIN. from countertop to

unprotected cabinet (when

no hood or microwave is

installed)

2" MIN. clearance

to side wall from cut-out

on both sides of cooktop

15" MIN. height from countertop

to nearest cabinet (including

light rails) on both sides of

cooktop

See label next

to nameplate for

MIN. clearance

to wall

IMPORTANT:

Requires a 5" free area between

the bottom of the cooktop to any combustible

material, i.e., shelving. Free area not required

when installing wall oven underneath cooktop.

Refer to installation instructions. Requires

a 15" minimum from cooktop to adjacent

overhead cabinets. Units are furnished with a

48" flexible armored cable.

NOTE:

36" induction cooktops are approved

for use over select GE 30" Single Wall Ovens

and Warming Drawers. Refer to cooktop

and wall oven/warming drawer installation

instructions packed with product for current

dimensional data. If installed with a GE

Telescopic Downdraft System, consult both the

cooktop and downdraft installation instructions

packed with product before installing. Cooktop

gas/electric supply may need to be re-routed

to install downdraft. The countertop cutout

requires 23-1/2" minimum flat countertop

surface and 25" minimum total countertop

depth. In addition, other clearances to front

edge of the countertop must be considered.

Before installing, consult installation

instructions packed with product for

current dimensional data.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

PHP9036SJ

GE Profile

™

Series 36" Built-In Touch Control Induction Cooktop

KW Rating

240V

11.1

208V

9.6

Amperage

240V

46.3 Amps

†

208V

46.3 Amps

†

†

NOTE:

Check local codes

for required breaker size

APPROXIMATE COOKING DIMENSIONS

GE PHP9036SJSS Quick Specs

GE PHP9036SJSS Manual

GE PHP9036SJSS manual content summary: