GE PHP960SMSS Installation Instructions - Page 9

Installation Instructions, INSERT COOKTOP INTO CUTOUT, ATTACH HOLD-DOWN BRACKETS, TO CABINET

Page 9 highlights

Installation Instructions 5 INSERT COOKTOP INTO CUTOUT Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met. Cooktop 6 ATTACH HOLD-DOWN BRACKETS TO CABINET Open the cabinet door. Install the second screw through the bracket and tighten. Then tighten the first screw. Install thumbscrew until it touches the bottom of the countertop. Cooktop Countertop IMPORTANT: Turn the thumbscrew until it touches the bottom of the countertop. Do not overtighten. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

INSERT COOKTOP INTO CUTOUT
Insert the cooktop centered into the cutout opening.
Make sure the front edge of the countertop is
parallel to the cooktop. Make final check that all
required clearances are met.
5
Cooktop
Installation Instructions
ATTACH HOLD-DOWN BRACKETS
TO CABINET
Open the cabinet door. Install the second screw
through the bracket and tighten. Then tighten the
first screw. Install thumbscrew until it touches the
bottom of the countertop.
IMPORTANT:
Turn the thumbscrew until it touches
the bottom of the countertop. Do not overtighten.
6
Cooktop
Countertop
9