GE PK7800EKES Quick Specs - Page 1

GE PK7800EKES Manual

Page 1 highlights

PK7800EK/SK GE Profile™ Series 27" Built-In Combination Convection Microwave/Convection Wall Oven DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) MOST 30" WALL CABINETS CAN BE USED WITH THIS UNIT. NOTE: These ovens are not approved for stackable installations. Cabinets installed adjacent to wall ovens must F have an adhesion spec of at least a 194°F F temperature rating. Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. E Electric wall ovens are not approved for E installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for ­current dimensional data. Side-by-side installations require at 20" MIN. da2doll0ooo"owrrMaoonpIpNceee.nniningg allowance least 2" between cutouts. CL CL KW RATING 240V 3.6 208V 2.7 20" 20" D D 2 x 4 or elaoe2elaeqnrvqnvxudseudeoilv4iflvfllwaiulwaduolsielstirebhthnhhnotwbtwtbrtoirouotiutthmntthntonosnmsfemiedliodrreosoeossfrsf.cocoufuftctocouuuutttotouutt or solid bottom floor. BREAKER SIZE 240V 20 Amps† 208V 20 Amps† Suitable ttoorSsbsuburuunrapiapntcpacpeionbionrrglsregtt runners (must support 275 lbs.) (must support 275 lbs.) †NOTE: Check local codes for required breaker size. For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000. 8-3/4" MAX. R8I-G3/H4T" MSIADXE. ONLY RIGHT SIDE ONLYCUTOUT DEPTH 2C3U-1T/O2"UMTIDNE. PTH 23-1/2" MIN. Junction box loJucantciotionn box (lJoucnactitoionn box m(Jauynbcteiolnocbaotexd inmaadyjabceelnotcated cinabaindejatc) ent cabinet) CONDUIT CO48N"DUIT 48" B 28" MIN. to b2o8t"toMmINof. to B jubnoctttoiomn obfox junction box CUTOUT WIDTH C2U5T"OMUITN.WIDTH 25-215/4" "MMINA.X. 25-1/4" MAX. A A C C 27'' 27'' CUTOUT HEIGHT C41U-T1O/8U" TMHINE.IGHT 4411--11//48""MMAINX.. 41-1/4" MAX. Recommended Remcoinmimmuemnded cutomuitnliomcuamtion fcroumtoutht elofcloaotiron from21t-h5e/8fl"oor 21-5/8" ATTENTION INSTALLER: All electric wall ovens must be hard-wired (direct-wired) ATTENTION INSTALLER: into an approved junction box. A plug and receptacle is NOT permitted on these products. All electric wall ovens must be hard-wired (direct-wired) into an approved junction box. A plug and receptacle is NOT permitted on these products. PK7800 JPKK37880000 NOTE: If the cabinet does not have a solid bottom, two braces or runners must be installed to support CABINET JK273"800 thNeOwTeEi:gIhftthoef tchaeboinveetnd. oFeosr nsiontghleavoeveansso, ltihdebrouttnonme,rs atnwdo bbrraacceess morursut nsnueprpsomrt u2s0t0blebsin(s9ta1llkegd).toFosrupdpoourbtle CAA-BOINveErTlap of oven at top of cutout 217" " otvhenws,etighhetroufntnheersovaennd. bFroarcseisngmleusotvseunpsp, othrte3r7u5nnlbesr.s (a1n7d0 bkgra).ces must support 200 lbs (91 kg). For double ovens, the runners and braces must support 375 lbs. N(1O7T0Ek:gI)f.marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary BA--OOvveerrlalappooffoovveennoavtetor psidoef couftoeudtges of cutout 3/14"" CB--OOvveerrlalappooffoovveennaotvbeortstoidmeooffceudtgoeust of cutout 31/"4" OCVE-NOverlap of oven at bottom of cutout 1" toNOadTdEw: Iofomdasrhksim, bsleumndisehrethseorutnhneecrustoauntdofproenntintrgimare uvnistiilbtlheeamboavrkesthoer oinpsetanlilnegdaorveecno, vitemready. be necessary to add wood shims under the runners and front trim NuOntTilEth: eIf mthaerkcsaboirnoept ednoiensgnaortehcaovveeraefdr.ont frame and the sides are less than 3/4" (1.9 cm) thick, shim bNoOthTsEid:eIfstheequcaalblyintoetedsotaebslinsohtthaevceuatofurot nwtidfrtahm. e and the sides are less than 3/4" (1.9 cm) thick, shim ODV-EInNstall depth ED--OInvsetaralllldheepitghht with trim FE--OOvveerraallllwheidigthht with trim F -Overall width 23-1/2" 4223-3-1/8/2" " 2462--33//48"" 26-3/4" both sides equally to establish the cutout width. Listed by Underwriters Laboratories Specification Revised 4/16

  • 1
  • 2

PK7800EK/SK
GE Profile
Series 27" Built-In Combination Convection Microwave/Convection Wall Oven
For answers to your Monogram, GE Café
Series, GE Profile
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 4/16
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
MOST 30" WALL CABINETS CAN
BE USED WITH THIS UNIT.
NOTE:
These ovens are not approved
for stackable installations. Cabinets
installed adjacent to wall ovens must
have an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
INSTALLATION INFORMATION:
Before installing, consult installation
instructions packed with product for
current dimensional data.
Side-by-side installations require at
least 2" between cutouts.
KW RATING
240V
3.6
208V
2.7
BREAKER SIZE
240V
20 Amps†
208V
20 Amps†
20" MIN.
door opening
allowance
CONDUIT
48"
C
L
Suitable
bracing
to support
runners
(must support 275 lbs.)
2 x 4
or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
CUTOUT WIDTH
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor
21-5/8"
CUTOUT HEIGHT
41-1/8" MIN.
41-1/4" MAX.
20"
E
F
D
CABINET
27"
A
–Overlap of oven at top of cutout
1"
B
–Overlap of oven over side of edges of cutout
3/4"
C
–Overlap of oven at bottom of cutout
1"
OVEN
D
–Install depth
23-1/2"
E
–Overall height with trim
42-3/8"
F
–Overall width
26-3/4"
8-3/4" MAX.
RIGHT SIDE ONLY
CUTOUT DEPTH
23-1/2" MIN.
28" MIN
. to
bottom of
junction box
Junction box
location
(Junction box
may be located
in adjacent
cabinet)
ATTENTION INSTALLER:
All electric wall ovens must be hard-wired (direct-wired)
into an approved junction box. A plug and receptacle is NOT permitted on these products.
NOTE
: If the cabinet does not have a solid bottom,
two braces or runners must be installed to support
the weight of the oven. For single ovens, the runners
and braces must support 200 lbs (91 kg). For double
ovens, the runners and braces must support 375 lbs.
(170 kg).
NOTE:
If marks, blemishes or the cutout opening are
visible above the installed oven, it may be necessary
to add wood shims under the runners and front trim
until the marks or opening are covered.
NOTE:
If the cabinet does not have a front frame
and the sides are less than 3/4" (1.9 cm) thick, shim
both sides equally to establish the cutout width.
JK3800
PK7800
NOTE:
Check local codes for required breaker size.
Listed by
Underwriters
Laboratories