GE PP9030SJSS Installation Instructions - Page 1
GE PP9030SJSS Manual
View all GE PP9030SJSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation 30" Electric Cooktop - Radiant Instructions Excludes Down-Draft Models If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com. In Canada, call 800.561.3344 or visit our website at: GEAppliances.ca. BEFORE YOU BEGIN Read these instructions completely and carefully. • IMPORTANT ³ Save these instructions for local inspector's use. • IMPORTANT ³Observe all governing codes and ordinances. • Note to Installer - Be sure to leave these instructions with the Consumer. • Note to Consumer - Keep these instructions for future reference. • Product failure due to improper installation is not covered under the Warranty. WARNING ³ This appliance must be properly grounded. • ATTENTION INSTALLER ³ALL COOKTOPS MUST BE HARD WIRED (DIRECT WIRED) INTO AN APPROVED JUNCTION BOX. A "PLUG AND RECEPTACLE" IS NOT PERMITTED ON THESE PRODUCTS. • Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty. PARTS INCLUDED MATERIALS YOU WILL NEED Junction Box Wire Nuts 90º or Straight Squeeze Connector for 1" Conduit TOOLS YOU WILL NEED Pencil Phillips Head Screwdriver Ruler or Straightedge Saber Saw 1/8" Drill Bit & Electric or Hand Drill Safety Glasses 4 Screws (WB01X1137) Foam Tape WB06K5042 2 Hold Down Brackets 31-10985 (01-15 GE) 1