GE PP912SMSS Quick Specs - Page 1

PP912SM GE Profile™ 30" Built-In CleanDesign Electric Cooktop Dimensions and Installation Information (in inches) KW Rating 240V 7.6 208V 5.7 Breaker Size 240V 40 Amps† 208V 30 Amps† †Note: Check local codes for required breaker size Important: Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable. Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current -dimensional data. If installed with a GE Profile™ Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. Consult cabinet and countertop manufacturer's specs for flush mount installation prior to install. Before installing, consult installation instructions packed with product for ­current dimensional data. Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening) use the following one-piece trim kit to fill in the over-size hole. Available at additional cost. JXTR32W (True White) JXTR32B (Black glass), JXTR32C (True Bisque) 29-7/8 21-1/2 Cooktop 3-1/4* 13" MAX. depth 28-1/2 19-5/8 30" MIN. to unprotected cabinet 1-3/4" to rear wall 15" MIN. to cabinet 1-1/2" MIN. clearance to side wall from cut-out 2-1/2** Required *Depth of unit at conduit connection location (rear) is 6-1/2" on models PP980/950 and 4-5/8" on models PHP900/PP975/972/962/945/942/932/912, JP655/356/346. **Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front. 1-1/2" MIN. clearance to side wall from cut-out Electrical junction box 16" MIN. below countertop Cut should not interfere with cabinet structure at front 30_ss_cktp_install.eps For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories Specification Revised 12/07 220579