GE PP9830SJSS Quick Specs - Page 1

PP9830SJ GE Profile™ Series 30" Downdraft Electric Cooktop Dimensions and Installation Information KW RATING Wall Installation: Wall 240V 9.1 208V 6.9 installations require 25" countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through- the-wall ducting. Peninsula or Island Installation: For peninsula/islands a minimum 26" countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation. Slab Installation: For peninsula or island installation and rear wall ducting, 6" PVC duct or locally approved piping should be used if installing under a poured concrete slab. Receptacle Location: Install an approved junction box within shaded area shown in diagram. Junction box must be at least 10-1/2" below top of cabinet. Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data. Note: Electrical cable is not supplied with unit. Order part number JXCK89 from your Ge Appliances Dealer These cooktops are approved for indoor use only 217⁄8ʺ (2115⁄16ʺ SS) 22ʺ Cut-out Dimensions (in inches) 20-5/8 201⁄2ʺ 293⁄4ʺ (2913⁄16ʺ SS) 283⁄4ʺ 23⁄16ʺ (21⁄4ʺ SS) Cabinet Dimensions (in inches) 25 *UL Requirement. 1-7/8" MIN. Required* 28-7/8 16 Note: A 6" minimum spacing to adjacent side wall is required 9 CL 4 20 10-1/2 *Note: A 6" minimum spacing to adjacent side wall is required Dimension and installation information are shown in inches. For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories Specification Created 2/15