GE PP989DNBB Use and Care Manual - Page 10

Care and cleaning of the cooktop. Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop. How to Remove Protective Shipping Film and Packaging Tape Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time. To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak. NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on. Vent Grille Before cleaning the vent grille, be sure the exhaust blower is turned off. To clean the vent grille, remove it from the cooktop by lifting it up and off. Wipe with a damp cloth. If necessary, the vent grille can be washed in the sink. Use dishwashing liquid for cleaning. Do not use abrasive cleaners. They will damage the vent grille's finish. Do not clean the vent grille in the dishwasher. Vent Filter and Chamber The filter is held in place at an angle with a hold bump. Lift the filter up and out of the vent opening diagonally. To clean the filter, swish it in hot, soapy water. Rinse well and dry thoroughly. Do not operate the vent without the filter in place. Vent Filter Do not operate the vent without the filter in place. Vent Chamber Shaped area 10 Remove and replace the filter diagonally through the vent opening. To order filters please call our toll-free number: National Parts Center...........800.626.2002 Filter WB02X10651 When replacing the filter, make sure it rests, at an angle, on the supports in the vent opening. To clean the vent chamber, use hot, soapy water. Rinse with clean water and dry thoroughly. Do not use abrasive cleaners; they will damage the finish. Replace the filter after it is cleaned and dry. Control Knobs The control knobs may be removed for easier cleaning. Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning. To clean the knobs, place them in a dishwasher or wash with soap and water. Rinse with clean water. Make sure the insides of knobs are dry before replacing. Replace the knobs in the OFF position to ensure proper placement. Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number: National Parts Center GEAppliances.com 1.800.626.2002