GE PSB1201NSS Installation Instructions - Page 6

Installation Preparation Preparation WITHOUT an Accessory Storage Drawer PREPARE THE OPENING (cont.) Installation over a GE/Monogram oven: 30″ 23-1/2″ 25-1/4″ 17-1/2″ Construct Solid Bottom Min. 3/8″ Plywood Supported by 2 x 4 or 2 x 2 Runners all Four Sides 2″ Min. (3″ Recommended) Per Oven Requirement PREPARE THE OPENING (cont.) Installation over a GE/Monogram Oven and Warming Drawer: 30″ 23-1/2″ 25-1/4″ 17-1/2″ Construct Solid Bottom Min. 3/8″ Plywood Supported by 2 x 4 or 2 x 2 Runners all Four Sides 2″ Min. (3″ Recommended) Per Oven Requirement • If you are replacing a GE/Monogram electric double oven with the combined installation of an Advantium 120V and a single oven, use the dimensions shown. The middle rail separating the two openings may need to be larger than the 2″ minimum shown. Per Warming Drawer Requirement 2″ Min. (3″ Recommended) NOTE: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height. See Warming Drawer installation instructions for details. CAUTION: For personal safety, the mounting surface must be capable of supporting the cabinet load, in addition to the added weight of this approximate 80-pound oven, plus additional oven loads of up to 50 pounds or a total weight of 130 pounds. 6