GE PSB2201 Installation Instructions - Page 13

ASSEMBLY TO ADVANTIUM 240V BUILT-IN SPEEDCOOK OVEN 1 REMOVE PACKAGING AND PARTS • Remove the drawer from the carton. • Remove all packing material and tape. • Open the drawer and remove any parts inside. • Locate parts. ASSEMBLING THE OVEN TO DRAWER (CONT.) C Remove the front two bottom screws on each side of the oven and the top center screw on each side of the storage drawer. Assembly Instructions Side Supports (2) Screws (2 Sets) 2 ASSEMBLING THE OVEN TO DRAWER A Place storage drawer on a surface with the front of drawer hanging over the edge of the surface. Not placing the front edge of drawer over the edge of the surface may result in damage to the drawer since the front edge of drawer hangs below the bottom of drawer. B Place the oven on top of the storage drawer. Make sure that the back and sides of the oven align with the back and sides of drawer. D Place the side supports into the tabs on the drawer and secure using the screws supplied and the screws removed in Step C. NOTE: The bottom of the oven side flanges will sit directly in front of the top of the storage drawer side flanges. E The oven and storage drawer assembly is now ready to be installed. Return to the Advantium 240V Built-In SpeedCook Oven Installation Instructions to complete the installation. 13