GE PSB42YGXSV Quick Specs - Page 3
Maximum Total Panel Thickness - profile 42
UPC - 084691172932
View all GE PSB42YGXSV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
PSB42YGX GE Profile™ 42" Built-In Stainless Side-By-Side Refrigerator with Dispenser 1/4" Framed Panel Dimensions If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door and grille. 5/16" important NOTE: Door Trim Reveal Maximum weight for Fresh Food panel is 70 pounds and 30 pounds total for Freezer panels. 1/4" Panel 3/4" Custom Panel Dimensions For a more custom appearance, 3/4" framed custom panels may be installed on trimmed models. The overlay panel is secured to a 1/4" finished backer panel. The custom panel then slides into the trim. Please see installation instructions for detailed information. Door 3/4" Custom Panel A Grille Panel important NOTE: B Dispenser Trim The refrigerator is supplied with factory installed dispenser trim. 1/4" Backer Panel Dispenser F Cutout • If panel is less than 1/4" thick, a noticeable gap will be created around the dispenser trim. Foam tape may be applied on the door to improve the fit. C • If panel is more than 1/4" thick, the panel will not fit behind the trim. G Freezer Panel Fresh Food Panel 1/4" Front Panel Dimensions (in inches) A B C D E F G 42" Models 39-15/16 10-3/4 67-7/8 16-7/16 22-11/32 17-5/8 35-5/32 D E For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. .250 + .750 = 1.000 Maximum Total Panel Thickness 3/4" Custom Panel Backer Panel NOTE: Left-to-right offset is not always equal to top-to-bottom offset. Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers' standards. Listed by Underwriters Laboratories Specification Created 1/08 210377