GE PSB42YPHSV Quick Specs - Page 3
Custom Panel Dimensions, 4 Framed Panel Dimensions, IMPORTANT NOTE, Dispenser Trim
View all GE PSB42YPHSV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
PSB42YPH GE Profile™ Series 42" Built-In Stainless Side-By-Side Refrigerator with Dispenser 1/4" Framed Panel Dimensions If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door and grille. 5/16" important NOTE: Door Trim Reveal Maximum weight for fresh food panel is 70 pounds, 45 pounds total for freezer panels, and 15 pounds for grille panel. 1/4" Panel 3/4" Custom Panel Dimensions For a more custom appearance, 3/4" framed custom panels may be installed on trimmed models. The custom panel must be cut to dimensions specified below. The custom panel then slides into the trim. Please see installation instructions for detailed information. Door 3/4" Custom Panel .250 + .750 = 1.000 Maximum Total Panel Thickness A Grille Panel B Dispenser E Cutout C F Freezer Panel Fresh Food Panel G D important NOTE: Dispenser Trim The refrigerator is supplied with factory installed dispenser trim. • If panel is less than 1/4" thick, a noticeable gap will be created around the dispenser trim. Foam tape may be applied on the door to improve the fit. • If panel is more than 1/4" thick, the panel will not fit behind the trim. 1/4" Backer Panel 3/4" Custom Panel Backer Panel NOTE: Left-to-right offset is not always equal to top-to-bottom offset. Front panel dimensions (in inches) A B 42" models 48" models MIN MAX MIN MAX 39-7/8 40-1/8 10-3/4 11 45-7/8 46-1/8 10-3/4 11 C MIN MAX 67-3/4 68 67-3/4 68 D MIN MAX 22-1/2 22-1/2 26-1/2 26-1/2 E MIN MAX 17-3/4 18 17-3/4 18 F MIN MAX 35 35-1/4 35 35-1/4 G MIN MAX 16-1/2 16-1/2 18-1/2 18-1/2 For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers' standards. Listed by Underwriters Laboratories Specification Created 7/14