GE PSCF5RGXCC Installation Instructions - Page 12
About the refrigerator doors., Refrigerator Doors, Door Alignment, Support Leg
UPC - 084691168270
View all GE PSCF5RGXCC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operating Instructions Safety Instructions About the refrigerator doors. Refrigerator Doors The refrigerator doors may feel different than the ones you are used to. The special door opening/closing feature makes sure the doors close all the way and are securely sealed. When opening and closing the door, you will notice a stop position. If the door is opened past this stop point, the door will remain open to allow you to load and unload food more easily. When the door is only partially open, it will automatically close. The resistance you feel at the stop position will be reduced as the door is loaded with food. When the door is only partially open, it will automatically close. Beyond this stop the door will stay open. 7/16″ Wrench Raise Door Alignment If doors are uneven, adjust the refrigerator door. Using a 7/16″ wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.) After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors. Support Leg (on some models) Before moving the refrigerator, you will need to screw up the support leg. Once the unit is relocated, you will need to screw down the support leg again. Installation Instructions Consumer Support Troubleshooting Tips Screw down the support leg until it touches the floor. This will prevent door misalignment. 12