GE PSE25KSHSS Installation Instructions - Page 34
Replace The Base Grille, Set The Controls, Start The Ice Maker, Cont.
View all GE PSE25KSHSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installation Instructions INSTALLING THE REFRIGERATOR (CONT.) 7 REPLACE THE BASE GRILLE Replace the grille by installing the two Phillips head screws. 9 START THE Ice maker Set the ice maker power switch to the I (on) position. The ice maker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically. It will take 2-3 days to fill the ice bin. Power switch 8 SET THE CONTROLS Set the controls to the recommended setting. Power switch NOTE: In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the ice maker. 34
34
Installation Instructions
REPLACE THE BASE GRILLE
Replace the grille by installing the two Phillips
head screws.
7
SET THE CONTROLS
Set the controls to the recommended setting.
8
START THE Ice maker
Set the ice maker power switch to the
I (on)
position. The ice maker will not begin
to operate until it reaches its operating
temperature of 15°F (–9°C) or below. It will then
begin operation automatically. It will take 2–3
days to fill the ice bin.
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the ice maker.
9
Power
switch
Power
switch
INSTALLING THE REFRIGERATOR
(CONT.)