GE PSIC5RGXWV Quick Specs - Page 2

GE Profile, Counter-Depth, 6 Cu. Ft. Side-By-Side Refrigerator - manual

Page 2 highlights

PSIC5RGX GE Profile™ Counter-Depth 24.6 Cu. Ft. Side-By-Side Refrigerator FOR 24 CUBIC FOOT MODELS Rough-In Dimensions and Installation Information (in inches) Installation Tips to Maximize the Built-In Look • All wall/floor molding should be removed prior to installation. • Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended. • When possible, recess both copper water line and electrical outlet. (See local codes) • Front and rear leveling legs are adjustable for the built-in look. (See owner's manual) *The rough-in dimensions of 70" for 23 cu. ft. models and 721/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position. †Model PSDW3YGX is 71-3/4" 24" Cabinet Water Electrical 3/4" Airspace (1/2" Gap + 1/4" Wall Plates) 25" Counter Top 12" Soffit 24" Cabinet 8' Ceiling Water Electrical 3/4" Airspace (1/2" Gap + 1/4" Wall Plates) 13" to 14" Cabinet 25" Counter Top Trim Fig 2A eps 70"*† 23 cu. ft. models 72-1/2"* 25 cu. ft. models 24-1/2" For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. 36-1/8" *The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refridgerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow additional clearance between cabinet doors and top of refridgerator trim when cabinet doors are in open position. †Model PSDW3YGX is 71-3/4". Listed by Underwriters Laboratories Specification Revised 5/08 Collar Trim In. w/ceiling 210226

  • 1
  • 2
  • 3
  • 4
  • 5

For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Installation Tips to Maximize the Built-In Look
• All wall/floor molding should be removed prior to installation.
• Water recess on rear wall recommended to prevent water
line damage. 48" minimum length, 1/4" diameter water
line tubing recommended.
• When possible, recess both copper water line and electrical
outlet. (See local codes)
• Front and rear leveling legs are adjustable for the built-in look.
(See owner’s manual)
*The rough-in dimensions of 70" for 23 cu. ft. models and 72-
1/2" for 25 cu. ft. models are minimum and measured from the
finished floor to top of opening (or the underside of the overhead
cabinets). For Models with Trim Kit: If frameless style cabinets
are planned for above the refrigerator, you may need to consider
adding a maximum of 1/4" (70-1/4") to height of opening for 23
cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for
additional clearance between the cabinet doors and the top of
refrigerator trim when the cabinet doors are in open position.
†Model PSDW3YGX is 71-3/4"
Rough-In Dimensions and Installation Information (in inches)
8' Ceiling
13" to 14"
Cabinet
12"
Soffit
36-1/8"
24-1/2"
70"*†
23 cu. ft. models
72-1/2"*
25 cu. ft. models
Listed by
Underwriters
Laboratories
Specification Revised 5/08
210226
25"
Counter
Top
Electrical
Water
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
PSIC5RGX
GE Profile
Counter-Depth
24.6 Cu. Ft. Side-By-Side Refrigerator