GE RM24925 Installation Manual - Page 14
Operating A Home Theater, Surround Sound System, Controlling The Surround Sound, Feature
View all GE RM24925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. Press the AUDIO button. 2. Press the TUNER (3) button. 3. Press the AM/FM button to toggle between AM and FM. 4. Use the Preset (CHAN+/CHAN-) buttons to move up and down channel presets. OPERATING A HOME THEATER SURROUND SOUND SYSTEM With GE receivers, a second press of the TV button should turn the receiver on. 1. Turn the TV on. 2. Press the AUDIO button 3. Select the audio input either by using the labeled number buttons or the FUNCTION button. 4. Press the VOL+ or VOL- buttons to control volume. NOTE: The Volume buttons may operate both TV and receiver volume at the same time. If this presents a problem, it may be resolved by disabling the TV speakers by going into the TV menu. CONTROLLING THE SURROUND SOUND FEATURE The Surround Sound feature may be turned ON/OFF by pressing the SURR ON•OFF button. 1. Press the SURR MODE button until the desired mode is found. 2. Press DELAY+ or DELAY- to achieve the desired delay effect. 3. Press the DSP ON•OFF button to turn DSP (Digital Sound Processor) ON or OFF. 4. Press the DSP Button until the desired effect is achieved. 5. Press the TEST button to listen to speaker levels. 6. Press FRONT, CENTER, or REAR buttons to select speakers. 7. Press the LEVEL+ or LEVEL- buttons to adjust speaker levels. 13