GE WPDH8800JMV Owners Manual - Page 8

Operating Instructions Safety Instructions Control settings. 13 Stain Inspector The STAIN INSPECTOR feature allows you to indicate what stains are on the garments in your load. This feature can be used with any wash cycle. To use STAIN INSPECTOR: 1. Select the wash cycle. 2. Press the STAIN INSPECTOR button (the button will light up when it is on). 3. Check the wash instructions on your garment. 6. Press the ENTER button to select the stain category. 7. Use the L and M arrows to select the desired stain. 4. Press the ENTER button to continue. 5. Use the L and M arrows to find the desired stain category. Installation Instructions Consumer Support Troubleshooting Tips You have the following stains available to choose from: OUTDOOR Clay Grass Mud/Dirt Rust Iron Tree Sap COSMETICS Lipstick/Lip Balm Deodorant Lotions Makeup (water-based) Oil (hair/mineral) BEVERAGES Grape Juice Coffee/Tea Fruit Juice Other Milk/Dairy Wine (red/white) FOOD/COOKING Butter/Margarine Cooking/Vegetable Oil Chocolate Tomato Based Barbecue Sauce PERSONAL Blood Perspiration Urine/Feces Mouthwash Vomit SCHOOL/OFFICE/HOME Adhesive Tape Ballpoint Ink Glue (white common) Pencil Mark Correction Fluid LAUNDRY Dingy White Socks Collar/Cuff Soil Dye Transfer Fabric Softener Yellowing OIL/GREASE/WAX Motor Oil/Lube Ointment/Salve Candle Wax Crayon Chapstick™ 8. Press the ENTER button to select the stain. 9. Your selected stain will appear on the display. 10. Press the START button to start the cycle. NOTE: To turn off STAIN INSPECTOR or to select a different stain, press the STAIN INSPECTOR button again. 8 NOTE: Prewash is selected automatically as the default for some stains. When selected automatically, the PREWASH button will light. For optimum stain removal, it is recommended to add high-efficiency detergent or proper wash additive to the prewash dispenser. You can turn off the prewash option if you do not want to add the prewash to the cycle.