GE WSXH208HWW Owners Manual - Page 6

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions About the washer features. NOTE: Not all features are available on all washer models. CYCLE SIGNAL OFF LOUD Cycle Signal (on some models) When the Cycle Signal is ON it will sound at the end of the cycle. The signal can be set at OFF (no sound), LOUD or anywhere in between. EXTRA RINSE COTTONS / EASY CARE ON OFF Extra Rinse (available on some cycles) Use an extra rinse when additional rinsing is desired to remove excess dirt and detergent from soiled loads. DOOR LOCKED Door Locked Indicator Light The indicator light is ON and the door is locked when the cycle knob is pulled out. The light turns OFF at the end of the cycle. AutoTemp (on some models) AUTO TEMP senses the incoming water temperature and adjusts the fill water to obtain the correct wash temperature. This feature is activated only when selecting a COLD or WARM wash temperature. For example, if a COLD wash is selected, some warm water may be added to reach a temperature needed to better dissolve detergents. Often, detergents are not completely dissolved in very cold water, especially in cooler climates. 6