Gigabyte A620M DS3H User Manual - Page 20

6) D_LED (Addressable LED Strip Header) The header can be used to connect a standard 5050 addressable LED strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. S_ Pin No. Definition 1 V (5V) 1 2 Data 3 No Pin 4 GND F_USB3 F _ F F_USB30 3 S S_F B_ _ F_USB3 B_ USB 0_ B SF _ S F_ Connect your addressable LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected _ _B to Pin 1 of the addressable LED strip header. Incorrect connection may lead to the damage of the LED strip. B 1 _ Addressable LED Strip For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page of GIGABYTE's website. Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. _ _ 7) SATA3 0/1/2/3 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support RAID 0, RAID 1, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for instructions on configuring a RAID array. G.QBOFM G.QBOFM S _S 7 7 SATA3 2 0 31 Pin No. Definition 1 GND 1 2 TXP 1 3 TXN 4 GND 5 RXN 6 RXP 7 GND B_ To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's website and search for "SATA Configuration" for more information. - 20 - B_ S_ S_ S_ U