Gigabyte B460M DS3H AC User Manual - Page 41

A-2: Installation in Intel RST Premium With Intel Optane System Acceleration mode

Get Gigabyte B460M DS3H AC PDF manuals and user guides View all Gigabyte B460M DS3H AC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

A-2: Installation in Intel RST Premium With Intel Optane System Acceleration mode If the SATA controller has been configured in Intel RST Premium With Intel Optane System Acceleration mode, please follow the steps below: 1. After system restarts, go to the BIOS Setup, make sure CSM Support under the Boot menu is disabled. 2. Go to Settings\IO Ports\SATA And RST Configuration and make sure USE RST Legacy OROM is disabled and RST Control PCIe Storage Devices is set to Manual. If you want to enable the Optane™ memory installed in the M2M_SB connector, set PCIe Storage Device On Port 21 to RST Controlled. 3. Enter the operating system, launch the Intel® Rapid Storage Technology utility from the Start menu, and then enable Intel® Optane™ Memory on the Intel® Optane™ Memory screen. 4. Then select which drive to be accelerated. Click Enable. Follow the on-screen instructions to proceed. When completed, restart the system. 5. Launch the Intel® Rapid Storage Technology utility from the Start menu and make sure the Intel® Optane™ Memory has been enabled. If you want to accelerate the system drive, you can select specific folders, files, or applications to accelerate using the Intel® Optane™ Memory Pinning function. (The Optane™ memory used must have at least 32 GB capacity.) •• An Optane™ memory cannot be used to accelerate an M.2 PCIe SSD. •• Do not abruptly remove the Optane™ memory. Doing so will cause the operating system to stop functioning correctly. •• If you want to change/remove the Optane™ memory, you must disable it using the Intel® Rapid Storage Technology or Intel(R) Optane™ Memory application first. •• After enabling the Optane™ memory, the related BIOS settings will remain even after a BIOS update. - 41 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
A-2: Installation in Intel RST Premium With Intel Optane System Acceleration mode
If the SATA controller has been configured in
Intel RST Premium With Intel Optane System Acceleration
mode, please follow the steps below:
1. After system restarts, go to the BIOS Setup, make sure
CSM Support
under the
Boot
menu is disabled.
2. Go to
Settings\IO Ports\SATA And RST Configuration
and make sure
USE RST Legacy OROM
is
disabled and
RST Control PCIe Storage Devices
is set to
Manual
. If you want to enable the Optane
™
memory installed in the M2M_SB connector, set
PCIe Storage Device On Port 21
to
RST Controlled
.
3. Enter the operating system, launch the
Intel
®
Rapid Storage Technology
utility from the Start menu, and
then enable Intel
®
Optane
™
Memory on the
Intel
®
Optane
™
Memory
screen.
4. Then select which drive to be accelerated. Click
Enable
. Follow the on-screen instructions to proceed.
When completed, restart the system.
5. Launch the
Intel
®
Rapid Storage Technology
utility from the Start menu and make sure the Intel
®
Optane
™
Memory has been enabled. If you want to accelerate the system drive, you can select specific folders, files,
or applications to accelerate using the
Intel
®
Optane
™
Memory Pinning
function. (The Optane
™
memory
used must have at least 32 GB capacity.)
•
An Optane
™
memory cannot be used to accelerate an M.2 PCIe SSD.
•
Do not abruptly remove the Optane
™
memory. Doing so will cause the operating system to stop
functioning correctly.
•
If you want to change/remove the Optane
™
memory, you must disable it using the Intel
®
Rapid
Storage Technology or Intel(R) Optane
™
Memory application first.
•
After enabling the Optane
™
memory, the related BIOS settings will remain even after a BIOS
update.
- 41 -