Gigabyte B550 AORUS Elite AX V2 User Manual - Page 17
M2A_CPU/M2B_SB M.2 Socket 3 Connectors
View all Gigabyte B550 AORUS Elite AX V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
_F _ S_ _F _0 F 10) M2A_CPU/M2B_SB (M.2 Socket 3 Connectors) The M.2 connectors support M.2 SATA SSDs or M.2 PCIe SSDs and support RAID configuration. Please note that an M.2 PCIe SSD cannot be used to create a RAID set either with an M.2 SATA SSD or a SATA hard drive. Refer to Chapter 3, "Con_fi0gurinFg a RAID Set," for instructions on configuring a RAID array. 110 80 60 42 M2A_CPU 110 80 60 42 M2B_SB (Note) _3 U Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Locate the M.2 connector where you will install the M.2 SSD, use a screwdriver to unfasten the screw on the heatsink and then remove the heatsink. Step 2: _3 U Locate the proper mounting hole based on the length of your M.2 SSD drive. If needed, move the standoff to the desired mounting hole. Insert the M.2 SSD into the M.2 connector at an angle. Step 3: Press the M.2 SSD down and then secure it with the screw. Replace the heatsink and secure it to the original hole. Make sure to remove the protective film from the bottom of the heatsink before replacing the heatsink. Select the proper hole for the M.2 SSD to be installed and refasten the screw and standoff. (Note) Only the B550 AORUS ELITE AX V2 has the heatsink. - 17 -