Gigabyte B560M DS3H AC User Manual - Page 16

_3 G.QBOFM 5) D_LED1 (Addressable LED Strip Header) The header can be used to connect a standard 5050 addressable LED strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. Pin No. Definition 1 V (5V) 2 Data 1 3 No Pin Addressable LED Strip 4 GND Connect your addressable LED strip to the header. The power 1 pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the addressable LED strip header. Incorrect connection may lead to the damage of the LED strip. F_USB30 3 B_ 6) LED_C1 (RGB LED Strip Header) S F_ DEBUG PORT The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m. F_USB3 Pin No. Definition B 1 12V 2G 1 3R RGB LED Strip 4B Connect your RGB LED strip to the header. The power pin 1 (marked with a triangle on the plug) of the LED strip must be 12V connected to Pin 1 (12V) of this header. Incorrect connection may lead to the damage of the LED strip. _ For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of GIGABYTE's website. Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. B_ USB 0_ B 7) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. 77 SATA3 0 2 13 11 G.QBOFM Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND B_ SATA3 5 7 1 4 7 1 To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Settings\IO Ports\SATAAnd RST Configuration," for more information. S_ U - 16 - DEBUG PORT DEBUG PORT S_