Gigabyte G1.Sniper Z97 User Manual - Page 30
COMA Serial Port Header, CLR_CMOS Clear CMOS Jumper
![]() |
View all Gigabyte G1.Sniper Z97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
11) COMA (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. Pin No. Definition 1 NDCD- 2 NSIN 9 10 1 2 3 NSOUT 4 NDTR- 5 GND 6 NDSR- 7 NRTS- 8 NCTS- 9 NRI- 10 No Pin 12) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values •• Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). Hardware Installation - 30 -
![](/manual_guide/products/gigabyte-g1sniper-z97-user-manual-18f30fb/30.png)