Gigabyte GA-6LXSG Manual - Page 20

vent an electrical short inside the cable connector., When removing the cable

Page 20 highlights

Speed LED Link Activity LED 10/100/1000 LAN Port I210/RTL8111F Speed LED: Link/Activity LED: State Yellow On Yellow Blink Green On Description 1 Gbps data rate Identify 1 Gbps data rate 100 Mbps data rate State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Green Blink Identify 100 Mbps data rate Off 10 Mbps data rate • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Hardware Installation - 20 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99

Hardware Installation
- 20 -
Link
Activity LED
Speed LED
10/100/1000 LAN Port
Link/Activity LED:
I210/RTL8111F Speed LED:
State
Description
Yellow On
1 Gbps data rate
Yellow Blink
Identify 1 Gbps data
rate
Green On
100 Mbps data rate
Green Blink
Identify 100 Mbps data
rate
Off
10 Mbps data rate
State
Description
On
Link between system and network or no
access
Blinking
Data transmission or receiving is occurring
Off
No data transmission or receiving is occurring
When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
When removing the cable, pull it straight out from the connector. Do not rock it side to side to pre-
vent an electrical short inside the cable connector.