Gigabyte GA-6PXSVT Manual - Page 35
SATA_DOM0/SATA_DOM1 SATA port 0 and port 1 DOM Jumpers, S3_MASK S3 Power On Select Jumper, CAUTION
View all Gigabyte GA-6PXSVT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
32) S3_MASK (S3 Power On Select Jumper) 1-2 Close: Stop an initial power on when BMC is not 1 ready. 2-3 Close: Keep initial power on. (Default setting) 1 33/34) SATA_DOM0/SATA_DOM1 (SATA port 0 and port 1 DOM Jumpers) CAUTION! • If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2. • If the SATA DOM power is supplied by external power, set the jumper to pin 2-3. • If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please refer to the pin definition table in the following. For SATA_DOM0 Pin No. Definition 1 1 P5V 2 SATA_DOM_0 3 GND SATA_DOM0 SATA_DOM1 For SATA_DOM1 Pin No. Definition 1 1 P5V 2 SATA_DOM_1 3 GND Hardware Installation - 35 -