Gigabyte GA-6UASL2 Manual - Page 20
SATA0/1/2/3/4/5 SATA 3Gb/s Connectors, USB1 USB Headers
View all Gigabyte GA-6UASL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
PORT PORT PORT 8) SATA0/1/2/3/4/5 (SATA 3Gb/s Connectors) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. SATA4 SATA2 SATA0 1 G.QBOFM Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND 7 SATA5 SATA3 SATA0 (Note) • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are configured, the total number of hard drives must be an even number. • A RAID 5 configuration requires at least three hard drives. (The total number of hard drives does not have to be an even number.) • A RAID 10 configuration requires four hard drives. When a RAID configuration is built across the SATA 3Gb/s channels, the system performance of the RAID configuration may vary depends on the devices are connected. 9) USB1 (USB Headers) The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. 10 9 Pin No. Definition 1 Power (5V) 2 Power (5V) 3 USB DX- 4 USB DY- 21 5 USB DX+ 6 USB DY+ 7 GND 8 GND 9 No Pin 10 OC When the system is in S4/S5 mode, only the USB ports routed to the F_USB1 header can support the ON/OFF Charge function. Hardware Installation - 20 -