Gigabyte GA-7VT880 User Manual - Page 24
IDE1 / IDE2 IDE1 / IDE2 Connector, SATA0 / SATA1 Serial ATA Connector
View all Gigabyte GA-7VT880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English 7) IDE1 / IDE2 (IDE1 / IDE2 Connector) Important Notice: Please connect first hard disk to IDE1 and connect CD-ROM to IDE2. The red stripe of the ribbon cable must be the same side with the Pin1. 40 39 2 IDE2 1 IDE1 8) SATA0 / SATA1 (Serial ATA Connector) You can connect the Serial ATA device to this connector, it provides you high speed transfer rates (150MB/sec). If you wish to use RAID function, please use it in unity with BIOS and install the correct driver to have proper operation. For details, please refer to the SATA RAID manual. Pin No. Definition 1 GND 2 TXP 7 1 3 TXN 4 GND 5 RXN 6 RXP 7 GND GA-7VT880 Serie Motherboard - 20 -
- 20 -
GA-7VT880 Serie Motherboard
English
1
7
7)
IDE1 / IDE2 (IDE1 / IDE2 Connector)
Important Notice:
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
39
40
IDE1
1
2
IDE2
8)
SATA0 / SATA1 (Serial ATA Connector)
You can connect the Serial ATA device to this connector, it provides you high speed transfer rates
(150MB/sec). If you wish to use RAID function, please use it in unity with BIOS and install the
correct driver to have proper operation. For details, please refer to the SATA RAID manual.
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND