Gigabyte GA-880G-UD3H Manual - Page 10
Product Specifications, Support for SATA RAID 0, RAID 1, and JBOD - sb710 chipset
View all Gigabyte GA-880G-UD3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1-2 Product Specifications CPU Support for AM3 processors: AMD Phenom™ II processor/ AMD Athlon™ II processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 5200 MT/s Chipset Memory Onboard Graphics Audio w North Bridge: AMD 880G South Bridge: AMD SB710 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1) Dual channel memory architecture Support for DDR3 1866 (O.C.) (Note 2)/1333/1066 MHz memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) North Bridge: - 1 x D-Sub port - 1 x DVI-D port (Note 3) (Note 4) - 1 x HDMI port (Note 4) Realtek ALC892 codec High Definition Audio 2/4/5.1/7.1-channel Support for Dolby® Home Theater Support for S/PDIF In/Out Support for CD In LAN 1 x Realtek RTL8111D/E chip (10/100/1000 Mbit) Expansion Slots Multi-Graphics Technology Storage Interface 1 x PCI Express x16 slot, running at x16 (PCIEX16_1) 1 x PCI Express x16 slot, running at x4 (PCIEX4_1) 3 x PCI Express x1 slots (The PCIEX1_2 and PCIEX1_3 slots share bandwidth with the PCIEX4_1 slot.) (Note 5) (All PCI Express slots conform to the PCI Express 2.0 standard.) 2 x PCI slots Support for ATI Hybrid CrossFireX™ technology South Bridge: - 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices - 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices - Support for SATA RAID 0, RAID 1, RAID 10, and JBOD iTE IT8718 chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive Hardware Installation - 10 -