Gigabyte GA-8I865PE775-G-RH Manual - Page 21
FDD FDD Connector, SATA0/SATA1 Serial ATA Connector - drivers
View all Gigabyte GA-8I865PE775-G-RH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English 6) FDD (FDD Connector) The FDD connector is used to connect the FDD cable while the other end of the cable connects to the FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB. Before attaching the FDD cable, please take note of the foolproof groove in the FDD connector. 34 33 2 1 7) SATA0/SATA1 (Serial ATA Connector,) Serial ATA can provide up to 150 MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly. 7 1 SATA0 7 1 SATA1 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND - 21 - Hardware Installation
Hardware Installation
- 21 -
English
6)
FDD (FDD Connector)
The FDD connector is used to connect the FDD cable while the other end of the cable connects to the
FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB.
Before attaching the FDD cable, please take note of the foolproof groove in the FDD connector.
1
2
33
34
7)
SATA0/SATA1 (Serial ATA Connector,)
Serial ATA can provide up to 150 MB/s transfer rate. Please refer to the BIOS setting for the Serial
ATA and install the proper driver in order to work properly.
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
7
1
7
1
SATA0
SATA1