Gigabyte GA-8I915G-MFD Manual - Page 35
CPU Enhanced Halt C1E
View all Gigabyte GA-8I915G-MFD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
English Password Check Setup System The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty. CPU Hyper-Threading Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value) Disabled Disables CPU Hyper Threading. Limit CPUID Max. to 3 Enabled Disabled Limit CPUID Maximum value to 3 when use older OS like NT4. (Default value) Disables CPUID Limit for windows XP. No-Execute Memory Protect (Note) Enabled Enables No-Execute Memory Protect function. Disabled Disables No-Execute Memory Protect function. (Default value) CPU Enhanced Halt (C1E) (Note) Enabled Disabled Enables CPU Enhanced Halt (C1E) function. Disables CPU Enhanced Halt (C1E) function. (Default value) CPU Thermal Monitor 2 (TM2) (Note) Enabled Disabled Enable CPU Thermal Monitor 2 (TM2) function. Disable CPU Thermal Monitor 2 (TM2) function. (Default value) On-Chip Frame Buffer Size 1MB Set On-chip frame buffer size to 1MB. 4MB Set On-chip frame buffer size to 4MB. 8MB Set On-chip frame buffer size to 8MB. (Default value) 16MB 32MB Set On-chip frame buffer size to 16MB. Set On-chip frame buffer size to 32MB. (Note) This item will show up when you install a processor which supports this function. - 35 - BIOS Setup