Gigabyte GA-8I915P Duo Pro Manual - Page 38
Onboard LAN2 Boot ROM - raid
View all Gigabyte GA-8I915P Duo Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
English Onboard H/W RAID Enabled Enable Onboard H/W RAID function. (Default value) Disabled Disable this function. Onboard H/W 1394 Enabled Disabled Enable onboard IEEE 1394 function.(Default value) Disable this function. Onboard H/W LAN1 Enabled Disabled Enable Onboard H/W LAN1 function. (Default value) Disable this function. Onboard H/W LAN2 Enabled Enable Onboard H/W LAN2 function. (Default value) Disabled Disable this function. Onboard LAN1 Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN1 chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard LAN2 Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN2 chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard Serial Port 1 Auto 3F8/IRQ4 BIOS will automatically setup the port 1 address. Enable onboard Serial port 1 and address is 3F8. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8. 3E8/IRQ4 2E8/IRQ3 Enable onboard Serial port 1 and address is 3E8. Enable onboard Serial port 1 and address is 2E8. Disabled Disable onboard Serial port 1. Onboard IrDA Port Auto 3F8/IRQ4 BIOS will automatically setup the port 1 address. Enable onboard IrDA port and address is 3F8. 2F8/IRQ3 3E8/IRQ4 Enable onboard IrDA port and address is 2F8. (Default value) Enable onboard IrDA port and address is 3E8. 2E8/IRQ3 Disabled Enable onboard IrDA port and address is 2E8. Disable onboard IrDA port. UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. ASKIR Set onboard I/O chip UART to ASKIR Mode. IrDA Set onboard I/O chip UART to IrDA Mode. (Default value) Only for GA-8I915P Duo Pro. GA-8I915P Duo (Pro) Motherboard - 38 -