Gigabyte GA-8I945G Pro Manual - Page 13
that you have installed the SATA controller driver successfully. You can proceed with the Windows
View all Gigabyte GA-8I945G Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
After the SATA controller driver installation is completed, you should see a screen as below. It indicates that you have installed the SATA controller driver successfully. You can proceed with the Windows 2000/XP installation. WindowsXP Professional Setup Welcome to Setup. This port of the Setup program prepares Microsoft(R) Windows (R) XP to run on your computer. To set up Windows XP now, press ENTER. To repair a Windows XP installation using Recovery Console, press R. To quit Setup without installing Windows XP, press F3. Enter= Continue R=Repair F3=Exit Figure 19 (Note: Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed under Windows once for that hard drive. After that, the driver will not have to be installed.) - 13 - SATA Hard Drives Configurations (Intel ICH7R)