Gigabyte GA-8I945P Dual Graphic Manual - Page 39
CPU Hyper-Threading, Limit CPUID Max. to 3, No-Execute Memory Protect, CPU Enhanced Halt C1E, CPU
View all Gigabyte GA-8I945P Dual Graphic manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
English CPU Hyper-Threading Enabled Disabled Enables CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value) Disables CPU Hyper Threading. Limit CPUID Max. to 3 Enabled Disabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disables CPUID Limit for windows XP. (Default value) No-Execute Memory Protect (Note) Enabled Enables No-Execute Memory Protect function. (Default value) Disabled Disables No-Execute Memory Protect function. CPU Enhanced Halt (C1E) (Note) Enabled Disabled Enables CPU Enhanced Halt (C1E) function. (Default value) Disables CPU Enhanced Halt (C1E) function. CPU Thermal Monitor 2 (TM2) (Note) Enabled Disabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value) Disable CPU Thermal Monitor 2 (TM2) function. CPU EIST Function (Note) Enabled Enable CPU EIST function. (Default value) Disabled Disable EIST function. Init Display First This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard. In order to enable the Dual Graphic function correctly, you have to connect the display cable to the graphic card in the PCIE_16_2 slot and set this item to PEG2. PCI Set Init Display First to PCI VGA card. PEG Set Init Display First to PCI Express VGA card (Slot1). (Default value) PEG2 Set Init Display First to PCI Express VGA card (Slot2) card. (Note) This item will show up when you install a processor which supports this function. - 39 - BIOS Setup